How to ensure the processing quality of UAV harness? What factors affect its life? In the field of UAV harness processing, the quality of UAV harness products has become the core that all enterprises must grasp, which is related to the lifeline of the whole company. If you want to stand out from many enterprises, you will definitely not miss the important competitive factor of quality assurance. While ensuring the quality of UAV harness products, we should also improve the service quality and strive to achieve double optimization of production and service quality. The following UAV harness manufacturers will introduce you to the four elements of quality assurance of UAV harness processing.
The four elements of quality assurance of UAV harness processing are as follows:

1. Every link should be controlled. After molding, the diameter and appearance of the production line must be checked to ensure the quality of the production line.

2. Through the direct inspection of its production line, its quality can be controlled and it can be produced. Must do a good job in quality control standards, so as to effectively analyze the status quo.

3. Control the quality of each link from the source, so as to effectively reduce the failure rate of its products and do a good job in production.

4. The length of the seat belt also includes the total length of the seat belt, the length of each branch of the product and the length of the flight space between the two ends of the seat belt.

Many enterprises are faced with a big problem in the actual operation process, that is, it is difficult to select materials for electronic wiring harness. Because the material we choose not only directly affects the appearance and performance of the finished harness, but also affects the quality and service life of the harness of UAV.

Among them, the factors affecting the life of UAV harness are as follows:

1. Poor quality of raw materials: The quality of raw materials is directly related to the life of wire harness, which is a normal copper output, but not all manufacturers will abide by the rules of wire processing industry. In order to reduce the cost and earn more profits, some UAV harness manufacturers manufacture copper-clad steel, galvanized iron or copper-clad steel harnesses, so the service life can not be guaranteed at all.

2. Illegal use: UAV harnesses with different thicknesses can withstand different currents. If the thin wire harness is used under high current, it will generate heat because it can't bear too much current, which will cause the wire harness or equipment to burn down and even catch fire. So when using the wiring harness, it depends on whether it can withstand the corresponding current.

3. Service environment: The service environment of UAV harness is also a factor that affects the service life of harness. Outdoor spreader is definitely not as long as indoor spreader. If the spreader used in outdoor advertising light boxes is exposed for a long time, the rain will greatly shorten the service life of the spreader.

We are a manufacturer of harness for UAV. If you want to know more about this, you can contact us. We can introduce you from different aspects.